Ordering sheets online without knowing the exact size is one of the easiest ways to end up with a return. Mattress sizes sound simple, but names overlap, dimensions vary slightly, and the numbers on a sheet package often refer to different things than the numbers on a mattress. This guide gives you the standard US sizes in one place, plus how to measure your own bed so you can buy with confidence.
Standard US Mattress Sizes
| Size | Width x Length (inches) | Typically Used For |
|---|---|---|
| Twin | 38″ x 75″ | Kids’ rooms, bunk beds, guest beds |
| Twin XL | 38″ x 80″ | College dorms, taller teens and adults |
| Full (Double) | 54″ x 75″ | Single adults, smaller rooms |
| Full XL | 54″ x 80″ | Taller single sleepers (less common) |
| Queen | 60″ x 80″ | Couples, the most popular size |
| King | 76″ x 80″ | Couples who want extra room |
| California King | 72″ x 84″ | Taller sleepers, narrower rooms |
These are approximate. Mattress makers can vary by an inch or so, which matters when you’re fitting a snug fitted sheet.
A Quick Note on Each Size
Twin is the smallest standard size, and fits one child or a small teen comfortably.
Twin XL is the same width as a Twin but five inches longer. Many college dorms use it, so dorm sheets are usually Twin XL, not Twin.
Full gives a single adult more room than a Twin, but it’s tight for two people.
Queen is the most common choice for couples and is widely available in the largest range of sheet styles.
King is wider than any other standard size, and is a good pick if you share the bed with kids, pets, or just like space.
California King is narrower but longer than a standard King. If you want a fuller explanation, see our guide on how King and California King sheets differ.
Flat Sheet vs Fitted Sheet Sizes
Sheet sizes match the mattress name, but each piece is cut differently:
- Fitted sheets are made to wrap around the mattress, so they must match both the mattress dimensions and its depth
- Flat sheets are larger than the mattress top so there’s enough fabric to tuck in at the sides and foot
This is why a flat sheet’s listed dimensions are always bigger than the mattress itself.
Don’t Forget Mattress Depth
Width and length are only half of the answer. Mattress thickness matters too:
| Sheet Type | Fits Mattress Depth Up To |
|---|---|
| Standard | About 12 to 14 inches |
| Deep Pocket | About 14 to 17 inches |
| Extra Deep Pocket | About 17 to 22 inches |
If you’ve added a topper, measure the combined thickness of the mattress and the topper. A sheet that fits the mattress alone may pop off once the topper goes on.
How to Measure Your Own Mattress
- Measure the width across the top, from one side to the other
- Measure the length from the head to the foot
- Measure the depth from the top surface down to where the mattress meets the base, including any topper or pad you use
- Compare your numbers to the chart above, rounding to the closest standard size
Using a tape measure takes about two minutes and avoids most sizing mistakes.
Pillowcase Sizes
Pillowcases follow their own sizing, which depends on the pillow, not the bed:
| Pillowcase Size | Dimensions (inches) |
|---|---|
| Standard | 20″ x 26″ |
| Queen | 20″ x 30″ |
| King | 20″ x 36″ |
Other Sizes You Might Run Into
- Split King: two Twin XL mattresses placed side by side, used with adjustable bases. You’ll need Split King sheets, which are often sold as two fitted sheets
- Crib and toddler sizes: these use their own smaller measurements, so always check the listing carefully
- RV and short queen sizes: slightly smaller than standard Queen, and need specifically labeled sheets
Common Sizing Mistakes to Avoid
- Buying Twin sheets for a Twin XL dorm bed, which leaves the fitted sheet too short
- Choosing King sheets for a California King mattress, or the other way around
- Ignoring mattress depth, especially after adding a topper
- Assuming all brands use the exact same dimensions
Frequently Asked Questions
What’s the most common bed size? Queen is the most popular size in the US, followed by King and Full.
Can I use Full sheets on a Queen bed? No. Full sheets are too narrow and too short, so they won’t stay on a Queen mattress.
Are Twin XL sheets the same as Twin sheets? No. Twin XL sheets are cut five inches longer, so Twin sheets won’t fit a Twin XL mattress properly.
How do I know if I need deep pocket sheets? Measure your mattress depth. If it’s over about 14 inches, or if you use a topper, deep pocket sheets are usually the right choice.
The Bottom Line
Knowing your mattress width, length, and depth turns sheet shopping from guesswork into a quick check against a chart. Take a minute to measure, keep this table handy, and double-check the listing before you order. Our Premium Cotton sheets are available across the standard sizes, so you can find a precise fit for your bed.



